1. Material: PVC
2. Warranty: 3 years
3. size: 10cm/20cm/30cm/40cm/50cm*152cm
Specifications:
Model |
M-1016 |
Product |
3D carbon fiber vinyl |
Thickness |
0.15mm-0.17mm |
Heat resistance |
-50°C to +200°C |
Stretch rate |
33+ pascal |
Mask thickness before embossing |
8c |
Glue material |
Imported removable glue |
Glue thickness |
0.025mm |
Glue weight |
20g/m2±2gm2 |
Gram weight of release paper |
120gsm embossing paper |
Thickness of release paper |
0.20-0.22mm |
Stand up against |
water, dirt, grease, salt, weak acids oil |
Durability period |
Indoor 5-6 years; outdoor: 3-4 years |
Compatibility |
Die cutting,car decoration,architectural decoration |
Colors available |
9 Colours. |
- Safe for the environment being nontoxic
- Highly flexible, with moderate heat stretchable, easy to install on moderate auto body curves, the glue stick easy and can be removed and reapplied repeatedly if needed to clean, smooth, flat surface areas.
- Do It Yourself! DIY – it is simple and easy to install.
- UV protection layer coating
- Long lasting material resistant to water and stains (oil, grease, salt, mild acid, dirt, etc.)
- Easy to clean with water! For more serious stains, please use non-abrasive soap with water.
- Trouble free removal, damage free restoration of the original state of the car.
Simply install Matt Vinyl like any other wrap vinyl product. Mainly used for cars, but it is also used for motorcycles, laptops, mobile phones, iPads, furniture, window, etc… We recommend experimenting with our products, and welcome new ideas for usage. There are new uses invented daily besides mainly using for Car / Auto Wrapping.
Approximate Usage per size:
- 2 meters is enough for roof or hood.
- 5 meters is enough for a full motorcycle wrap or hood, roof and trunk.
- 15 meters is enough for a full sedan wrap.
- 25 meters is enough for an average size SUV.
- 30 meters is enough for two full sedan wraps or a large SUV wrap
Matt vinyl
Glossy vinyl
3D Carbon fiber vinyl
4D Carbon fiber vinyl
5D Carbon fiber vinyl A version
5D Carbon fiber vinyl B version
How to Install Carbon Vinyl Products:
- Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles using a soft rubber squeegee will help smooth out bubbles and wrinkles
- Do not apply in rainy or cloudy weather. No waxing one week before the application of the car vinyl. No washing for 48hrs after application. Crimps or creases may occur if the temperature is low,
- It is best to heat it with a hair drier first from about 30 cm and then apply.
Q: Can I choose to wrap just part of my vehicle?
A: Vehicle wrapping is most effective when the whole vehicle is covered in a complete design, but you can chose to wrap just part of the vehicle, such as the rear doors or side panels.
FAQs: Carbon Wrap
Q. What are the benefits of vehicle wrapping?
A: Vehicle wrapping vinyl can be easily removed so that when you want to sell your vehicle you can simply restore it to its original color without losing value.
The main reason people have their vehicles wrapped is because they would like to keep their car but want a different color.
Q: How much does vehicle wrapping cost?
A: The cost depends on the size of vehicle being wrapped but for an average size car it is very less as compared to re-spray
Q: Is the vehicle wrap easy to remove?
A: Yes. The vehicle wrapping films are of high quality adhesives and can be easily removed within 5 years of the wrap being installed.
Q: Do I have to pay someone to remove the wrap?
A: No. It’s simple to remove.
Q: Will vehicle wrapping damage the vehicle?
A: Applying specialist vehicle wrapping film to your vehicle will not damage your paintwork. However If you already have stone chips, abrasions or rust patches on your paintwork it?s important to remember that when the vinyl is removed it may pull loose paint off with it.
Q: Can I choose to wrap just part of my vehicle?
A: Vehicle wrapping is most effective when the whole vehicle is covered in a complete design, but you can chose to wrap just part of the vehicle, such as the rear doors or side panels.
Great film. I order a second time from this store. Sends quickly. Film on a foam Babina. It's all great.
Very well made product. The carbon cover is really looking good on my white colour SSD external hard drive. Thank’s to the store. I will buy again.
Super
The package arrived very quickly. Very well packaged. I warmly recommend
super
The texture and purpose for what I need this adhesive is what I needed