This guide will show you how to get a spare piece of leather from a leather bound item like a sofa or chair. You will need this if you would like us to perform a colour match for one of our colourant products. We will need a piece around the size of a 5p coin or 2cm / 1inch square, we may be able to work with a smaller piece but the match may not work as well..

TOOLS REQUIRED

  • Screwdriver - To remove any staples hiding the edge of the leather
  • sharp Knife - Used to cut a sample of the leather
  • Hammer - To replace the staples once you are finished.

METHOD

STEP 1. PREP THE ITEM

Turn the sofa upside or on its side
To cut a sample of leather from your sofa to send to us, there are two places you can get it from. The first is from the bottom of the sofa. Turn the sofa onto its side or back as shown in the picture and you will see a cloth stapled to the framework.

STEP 2. REMOVE SOME STAPLES

Remove some staples from the underside
There is always an overhang of leather beneath the cloth. Using a screw driver or other sharp object, leaver out several staples and then peel back the cloth.

STEP 3. REMOVE SOME MORE STAPLES

The leather overhang
You will then see (as shown) an overhang of leather stapled to the framework. Again, you will need to pluck out the staples.

STEP 4. REMOVE A PIECE OF LEATHER

After removing the staples cut a piece of leather from the overhang. It has to be bigger than a 5p, if you cannot get something that big then send us as many small pieces as you can. Remember: The bigger the sample, or the more you send, then the better we can match the colour.

STEP 5. PUT BACK SOME OF THE STAPLES

Once you have remove your piece of leather you can put the staples back in to replace the protective cloth and tidy up the edge of the leather again.

OPTION 2

The inside of a cushion
If you cannot get a sample from underneath then the next best place is from one of the cushions. Undo the zip as shown in the photo and then find where the leather is stitched together. Where it is will be an overhang of leather. The leather here is normally thin so it is best to send us several strips. When ordering a colour match, simply place your order online and select the ‘Send in a sample for colour match’ option. You can then send your sample, along with this completed form, to the Email: Support@Automotorange@gmail  and we’ll do the rest. Name………………………………………..…………….. Order Number………………………………………….. Telephone Number……………………………………